Electrical test equipments

Dry ARC Resistance Tester

Approx Price: Rs 3.5 Lakh / Piece(s) 
Minimum Order Quantity: 1 Piece(s)
Dry Arc Resistance Tester is designed to conduct high voltage, low current arc Resistance test on solid electrical insulation material as per:
  • ASTM D 495-99 (2004) -“Standard Test method for High – Voltage / Low -Current, Dry Arc Resistance of solid Electrical Insulation”
  • UL 746 A “Testing for electrical properties.” This product is meant for all insulator/ polymer/ electro plastic manufacturers and appliance manufacturers that use insulators in their products.
  • The product is compact and can be mounted on a table. It comes with an inbuilt legacy microcontroller module to conduct the test sequence exactly as per the ASTM table. The program has the voltage and current calibration facility. In addition, the test voltage can be adjusted using a variable auto transformer for any value till 12.5 kV. The micro controller displays the fail result as to the number of seconds the sample has withstood or declares the sample as pass.
  • Other safety features include zero interlock facility and door open indication and control for user safety making the product a state of an art one.

Comparative Tracking Index Tester

Approx Price: Rs 1 Lakh / Piece(s) 
Minimum Order Quantity: 1 Piece(s)
The Comparative Tracking Index Tester is used in determination of the comparative tracking index
of solid insulating psrts supporting live parts used for electrical accessories such as mcb,s switches . sockets, plugs started holders ,connectors ,etc

the ctit -01 indicates the relative behsvior of solid electrical insulaerial whit regard to their susceptibstive to surface when exposed under electric stress , to waer and other ,environmental contaminants . This test also referred in many other standards such as is 2824-1975,iec 60335.

Glow Wire Test Apparatus

Approx Price: Rs 85,000 / Piece(s) 
Minimum Order Quantity: 1 Piece(s)
Glow Wire Test Apparatus : - is designed to carry out fire hazard testing specified in iec 60695-2-10 2000-10. Flammability test is to check the resistance to fire of electrical insulators that touch directly conducting part & of insulators testing with regard to fir hazards can be done by creating exactly the conditinos occurring in practice . However this is not possible in most instances.

Hence for this test the actual conditions are simulated as closely as per possible by the wire tester this tester is also refrred in mony standards such as is 1100,is 3854:1997/is 1293:1988/is 371:1999 pt 2sec,iec 884/94,iec 60598,iec60598,iec 61058, bs 6458,bs en 60695-2,11,12.

Needle Flame Test Apparatus

Needle Flame Test Apparatus :- the system will be specially designed to carry out tester as per iec 60695-11-5

1. Plc to control the seqeunce of operation and display the test result.
2. Ball screw type sliding mevhanism for vertical and horizntal movement .
3. Enclosure with 0. 5 cubic meter internal volume .
4. Bunsens burner with 0. 9 mm diameter with regulater and needle flame diameter 0. 5
5. Test time foer temperature to increase from 100`c +/-5` c to 700`c+/- will be 23. 5+/-ls
6. Test time in second .
7. Draught free condition.
8. Odservation of test from outside from mirror .
10. Exhaust to remove product of cpmbustion
11. Timing device to lerance not more then 0. 5 s.

Additional Information:
  • Minimum Order Quantity: 1 Piece
Looking for Electrical test equipments ?
© Asian Test Equipments
 
Desktop Site Back to top