Leather Testing Equipment


Approx Price: Rs 50,000 / Unit(s) 

Our organization is counted amongst the most distinguished manufacturers, suppliers and exporters of a vast array of Flexometers. These products are manufactured on a rigid metallic base plate using optimum-grade material so that these are in tandem with international quality standards. All our products are used for testing flexing endurance of leather products. Furthermore, our logistics personnel make sure that the consignments are timely delivered at clients’ destination using easy modes of shipment.




  • All the pivot points of the apparatus have ball bearing to ensure the long life and smooth operation
  • The apparatus is finished in bright chrome/ zinc plating and NC based painting for a corrosion resistance finish
  • Electronic counter with key reset and backup memory to count the total number of flexing cycles


Technical Data

Flexing frequency 100± 5 cycles/ minute
Angle of oscillation of grips 22.5 ±0.5°
Dimension of test specimens 70 X 45 mm

Maximum number of test specimens tested simultaneously six or Twelve

Crackness Tester

Approx Price: Rs 25,000 / Unit(s) 
Asian Crackness Apparatus consists of a clamp device, which rigidly holds one end of the test piece. A mandrel of the desired diameter and a roller of diameter 25mm make contact with the flesh and the grain surface respectively of the middle portion of the test piece,across its full width.

The axes of both the mandrel is fixed relative to the clamp, the axel of the roller is attached to a handle pivoted at the axis of the mandrel. It consists of a horizontal base plate to which is rigidly attached a shouldered spigot whose narrow part has the diameter of the smallest mandrel.

The circular hole in the handle fits over, which thus acts as a pivot. A mandrel of the desired diameter fits. A roller of diameter 25mm is carried on a vertical axel fixed to the handle in such a way that its distance from the circular hole may be set at any value desired.

The test piece clamp is attached to a slotted strip, which allows its position relative to the base plate to be varied. All the mandrels are made of stainless steel and the other parts are either painted or chrome platted to give a corrosion resistance long life.

  • IS: 5914-1970 method of physical testing of leather, LP: 13, resistance to cracking of grain and crack

Water Vapour Permeability Tester

Approx Price: Rs 72,000 / unit 
The “Asian” Water Vapour Permeability Tester made of twelve brass bottles. It measures water vapour permeability of leather. The bottles have nut of circular opening. The bottles are mounted on the bottles holders which rotate at specified revolution per minute with the help of motor pulley & belts.

The axis of the bottles is parallel to the axle of the bottles holders. A fan mounted in front of the mouths of the bottles and consisting of three blades in planes that is inclined at 120º to one another. The planes of the blades pass through the prolongation of the axle of the wheel.

A pre set digital timer is mounted for setting total no. Of hours of instrument movement. All the components are chrome/ zinc plating & painting for corrosion resistance long life.

  • Is: 5914- 1970: methods of physical testing of leather, lp : 21 – water vapour permeability:
  • IUP/ 25: official method of international union of leather chemists societies 1961

Spray Tester

Approx Price: Rs 75,000 / Unit(s) 
Asian Spray Tester consists of a stand for holding the spray device the button portion have a sample holder at 45° whose center lie at the center line of the spray device. spray device made of glass (or plastic) laboratory funnel which is connected to the spray nozzle by rubber tube.

Technical Specification:
  • AS PERIS: 390

Finish Film Adhesion Tester

Approx Price: Rs 25,000 / Unit(s) 

The “Asian” Finish Film Adhesion Tester made test specimen plates on which the test specimen is paste. There are a set of pressing jig on which the test specimen plates are mount. A set of loading weight supply with the instrument. Made on the casted base plate. On which the supporting platform with loading knob is mounted. When press the loading knob the supporting platform will lift. The test specimen-pasting strip with test specimen mounted on the slot of the instrument & tight with the help of the tightening bolts. Slotted weights with hanger are also supplied with the instrument for applying the force on the test specimen is testing.

Crock Meter

Approx Price: Rs 14,000 / Unit(s) 

One of the test for determination of colour fastness of dyed of printed leather is the Crock Meter For Leather. This test is used for the determination of colour fastness against rubbing, either under dry or wet condition .In this test a moving brass finger of specified shape and size rubs against the test specimens under a fixed load.

The amount of colour lost by the test specimen and the amount of colour transferred to a piece of abradant Leather fixed over the base of the moving finger are graded with the help of standard grey scales to evaluate the colour fastness of the sample under test rubbing.

Bench Thickness Gauge

Approx Price: Rs 6,000 / Piece 

The “Asian” Bench Thickness Gauge for Leather is used for the thickness measurement of the fabric, paper, rubber, plastic, flooring, etc. Analogue and digital models are available. The systems consists of a dial micrometer fitted on a digital micrometer fitted on a rigid metallic frame.

The micrometer has a flat circular indenter, which exerts the specified pressure on the fabric sample whose thickness is being measured through a dead weight. The fabric sample is kept on an anvil, which is in from of a flat circular platform.

The axis of the indenter and the anvil coincide and is the same as the axis of movement of the indenter. The indenter can be raised and lowered gently onto the fabric sample with the help of a lifting lever.

Technical specification:
  • 0-5 mm, 0-10mm, 0-25 mm, analogue and digital, bench type and portable with different throat depth

Bench Model Lasto-Meter

Approx Price: Rs 35,000 / Piece 

Backed by rich industry experience, we are manufacturing, supplying and exporting a vast variety of Bench Model Lasto-Meter. All our products are manufactured under the strict surveillance of our skilled and qualified professionals. These products are widely used to test the strength of the footwear. The offered products are widely demanded by the customers spread across the nation owing to their robust construction, longer service life and accurate results.


Looking for Leather Testing Equipment ?
© Asian Test Equipments
Desktop Site Back to top